MyColor 24″ Two-Head DTF Printing System
Produce full-colour garment transfers with the MyColor 24″ Two-Head DTF Printing System. Its two Epson I3200-A1 printheads print CMYK and white pigment ink across media up to 600 mm (24 inches) wide.
Complete print-to-cure system. Includes the printer, automatic powder shaker and infrared curing unit for a streamlined roll-to-roll DTF workflow.
Share :
Product Overview
The MyColor 24″ Two-Head DTF Printing System is a production-ready direct-to-film solution for garment decorators, custom print shops and growing apparel businesses. Two Epson I3200-A1 printheads print colour and white ink simultaneously across a maximum 600 mm (24-inch) width.
The included automatic powder shaker and infrared curing unit carry printed PET film through powder application, excess-powder removal and curing before the finished transfer is applied with a compatible heat press.
Key Features
- Two Epson I3200-A1 printheads for colour and white-ink production.
- Up to 600 mm (24-inch) print width for individual graphics and gang sheets.
- CMYK plus white pigment-ink configuration.
- Automatic white-ink circulation helps keep pigment moving.
- High-precision aluminium frame for stable roll-fed production.
- Adjustable pinch-roller pressure supports accurate film feeding.
- Automatic powder application and excess-powder removal.
- Infrared curing system with five intelligent heating tubes.
- Compatible with commonly used 30 cm, 45 cm and 60 cm DTF film widths.
Technical Specifications
| Configuration | Printer with automatic powder shaker and infrared curing unit |
|---|---|
| Printheads | 2 × Epson I3200-A1 |
| Maximum print width | 600 mm (24 inches) |
| Ink configuration | CMYK + white pigment ink |
| Resolution | Up to 3200 dpi |
| Rated print speed | 4-pass: up to 14 m²/h; 6-pass: up to 8 m²/h; 8-pass: up to 6 m²/h |
| White-ink system | Automatic circulation |
| Compatible film widths | 30 cm, 45 cm and 60 cm |
| Powder handling | Automatic application and excess-powder removal |
| Curing system | Infrared curing with five intelligent heating tubes |
Rated speeds are based on the listed print modes and may vary with artwork, RIP settings, media, ink and operating conditions.
Applications
Create DTF transfers for T-shirts, hoodies, sportswear, workwear, uniforms, bags, caps, footwear and other compatible textile products. The 24-inch width supports larger graphics and efficient gang-sheet production.
Compatibility and Workflow
Use compatible PET DTF film, pigment inks, hot-melt powder and a heat press. Confirm RIP software, ink, film, powder and transfer settings with Value-Rite before production.
Included Equipment
This listing is for the complete print-to-cure system: the MyColor two-head printer, automatic powder shaker and infrared curing unit. A heat press and consumables are not included unless stated in your quotation.
Installation and Operating Notes
Confirm electrical requirements, ventilation, operating space, delivery access and installation arrangements with Value-Rite before ordering. Follow the supplied operating and maintenance instructions, particularly for white-ink circulation and daily printhead care.
Warranty and Support
Contact Value-Rite for the warranty terms, installation, training and support options applicable to this system and your quotation.
Official Product Video
Audley S7070-3 60 cm Two-Head DTF Printer