Unisub 5729 Round Trophy Disk Insert — 1" diameter

Create a personalized recognition piece with an achievement, name, date or logo. Keep small text readable and confirm the printable outline before pressing.

Key Features

• Round Trophy Disk Insert.
• Gloss White printable surface.
• Aluminum printable substrate.
• 1 in diameter.

Applications

Recognition awards, commemorative displays and trophy personalization.

Technical Specifications

What’s Included

Unprinted trophy disk only; trophy and adhesive are separate.

How to Personalize

Manufacturer starting settings: 385°F / 195°C for 30–40 seconds. The chart was developed on a 20 × 24 in Geo Knight swing-away press at 60 PSI; equipment may vary. Test before production.

1. Prepare mirrored artwork using the matching outline; keep important content away from cutouts and edges.
2. Remove protective film if present and clean the printable surface with a lint-free cloth.
3. Position the transfer against the coated face and secure it with heat tape. Place the flat blank face up with the transfer above it and clean protective paper around the work.
4. Press using the manufacturer starting range, adjusting pressure for the equipment and testing before production.
5. Use heat-resistant gloves to remove the blank, remove the transfer and allow it to cool before assembly.
6. Check the trophy recess before printing and mounting the disk.

Care and Support

Wipe the finished surface with a soft cloth. Avoid abrasive cleaners and soaking; keep wood-based edges dry. Check mounting and assembly components before use. Contact Valuerite with the SKU for product support.

Downloads

• Manufacturer printing settings (PDF)
• Unisub product catalogue (PDF)

Source: Valuerite product details and Unisub manufacturer guidance. Printable insert and overall dimensions are identified separately where applicable.